基于时域平均的齿轮故障诊断

提出了信号时域平均处理的新算法,解决了周期截断误差对平均结果的影响,并对测取的齿轮箱齿轮故障振动信号进行了处理。实验结果表明:该方法在齿轮故障信号的处理中能够消除背景噪声的影响,取得比较理想的效果。     

非自伴情形下时滞抛物方程的惯性流形

利用Lyapunov-Perron方法在适当的谱间隙条件和适当小的时滞假设下,证明了一类非自伴算子情形下半线性时滞抛物方程惯性流形的存在性。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于最短拦截时间的异面拦截机动轨道设计与优化

本文构建了单脉冲机动在燃耗约束下的最短时间拦截轨道设计模型与求解方法,将用数学泛函求边值问题转换为高次代数方程的求解计算,并用牛顿迭代法进行快速寻根,仿真结果表明模型及算法准确、有效,满足精度要求。     

基于行为建模的移动代理性能评估

针对移动代理的分布式应用性能评估需求,建立了移动代理生命周期中主要行为的网络负载模型和时间消耗模型.在3种典型分布式应用想定下,分析了基于C＼S模式和移动代理模式的应用实现基本过程,对两种模式下的网络负载和执行时间进行了仿真比较,结果证明了在访问节点数量较多,网络传输速率较低时,移动代理模式的具有更好性能.     

基于复杂排队系统的TOC服务模型与性能分析

三值光学计算机的运算请求处理过程缺乏合理、系统的性能评价标准与体系。基于M/M/1、M/M/n、MX/M/1和M/MB/1构成的复杂排队系统,构建了三值光学计算机的四阶段服务模型,同时建立了立即调度和结束时调度两种不同策略与算法。基于不同排队系统讨论了运算请求的接收时间、预处理时间、运算时间和发送时间的计算方法,进而得到最终响应时间。最后,通过仿真实验对两种策略的模型进行验证,结果表明结束时调度策略明显优于立即调度策略。     

基于CP CI总线的时统模块测量电路设计

为解决时统模块的测试问题,提出了一种基于CPCI总线的数字时统模块测量电路。重点对测量电路的组成、测量原理、CPCI总线接口设计与驱动设计等内容进行了介绍。提出的测量电路满足了4块某型时统模块的批量测试需求。该测量电路具有稳定性高、性价比高、易于实现等优点,适合于工程应用。     

基于通信时延信息的被动定位精度分析

基于通信信号中的时延信息,构建了基本TDOA定位算法,详细推导出了其理论定位精度分布及理论上最优定位点精度,为其定位的主要误差影响因素分析,及基于时延信息的被动定位算法的设计和改进力度提供了参考依据。并结合通信信号实际环境,给出了较为全面的仿真案例验算。     

无人作战飞机通信延时仿真

通信作为无人作战飞机任务控制站与无人作战飞机之间的纽带,在无人作战飞机系统中起着至关重要的作用。简要阐述了引起无人作战飞机通信延时的具体因素,分析了无人作战飞机使用的几种通信方式,提出并运用网络仿真工具NS2(networksimulation-2)针对视线通信方式和不同中继方式下的通信延时进行了仿真,最后对仿真作了分析和解释。